Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned
Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Preowned

Regular price $ 49.99

Very Good - PREOWNED. COMES AS PICTURED. Item has been inspected and in very good condition. Comes with a 30-day warranty.

PREOWNED. COMES AS PICTURED. Item has been inspected and in very good condition. Comes with a 30-day warranty.

 NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 2~20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:3.7V, LiFe:3.3V NiCd Delta-peak voltage sensitivity 1 to 20mV NiMH Delta-peak voltage sensitivity 1 to 20mV Battery temperature cut-off 20 to 80C or OFF Waiting time between charge/discharge 1 to 60 min. Integral timer limit for safety 10 to 720 min.or OFF Maximum charging capacity limit for safety 10 to 9990mAh or OFF Key beep and buzzer sound ON/OFF Input DC power low alert 10 to 11V ###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)